Balancing valves

Balancing valve

Balancing valve STV DN15/50 has a body of hot-pressed DZR brass, intended for flow balancing in heating and cooling systems. The valve is equipped with diaphragm type test points which accept commercial probes. The test points are positioned at a 45° angle from the centre point of the handwheel which avoids dirt and particles entering the measuring points and increases the measuring accuracy.

The handwheel is equipped with digital settings which makes it easy to read while installing. Hand wheel setting can be locked.

Commissioning sets

Double regulating valve STVU DN15/50

with measuring station is used for flow measurement in heating and cooling installations. The measuring station is DZR copper alloy with threaded body in sizes between 15mm and 50mm diameter. The test points are diaphragm type which accept commercial probes.

Products: Double regulating valve / Measuring station / Balancing valve

Balancing valve

Balancing valve STV DN65/300 has a body of cast iron, intended for flow balancing in heating and cooling systems.

Larger valves are pressure balanced for ease of setting and have lockable handwheel facility.

Double regulating valve STVU DN65/300 is used for flow measurement in heating and cooling installations. The measuring station is wafer pattern for installation between PN16 flanges within the bolt circle. Test points are diaphragm type which accept commercial probes.

Products: Double regulating valve / Measuring station / Balancing valve